Language; Software Version; System Reset - PERFECTPRO ROCKPRO Manuel De L'utilisateur

LANGUAGE

The radio can be configured to a different language.
1. Press the ON/OFF button to turn on the radio.
2. Press the MENU button, and then rotate the TUNING/SEEK/SELECT knob to
"System settings".
3. Press the TUNING/SEEK/SELECT knob; rotate the TUNING/SEEK/SELECT knob
to "Language".
Press the TUNING/SEEK/SELECT knob to enter the language adjustment menu.
4.
5. Rotate the TUNING/SEEK/SELECT knob to select the desired language (default is
English).
6. Press the TUNING/SEEK/SELECT knob to confirm your choice. The display will
change to the chosen language.

SOFTWARE VERSION

The software display cannot be altered and is just for your reference. You can only view
the software version in DAB, FM, Bluetooth, Aux In or USB mode.
1. Press the ON/OFF button to switch on the radio.
2. Press the SOURCE button to select any of the modes.
3. Press the MENU button; rotate the TUNING/SEEK/SELECT knob to "System
settings".
4. Press the TUNING/SEEK/SELECT knob; rotate the TUNING/SEEK/SELECT knob
to "Info".
5. Press the TUNING/SEEK/SELECT knob to view the software version.
6. Press the MENU button back to the last menu, and press the MENU button again
to return to the normal radio display.

SYSTEM RESET

If the radio fails to operate correctly, or some digits on the display are missing or
incomplete, carry out the following procedure.
1. Press the ON/OFF button to switch on the radio.
2. Press the MENU button;
3. Then, rotate the TUNING/SEEK/SELECT knob to the "System settings". Press the
TUNING/SEEK/SELECT knob.
4. Rotate the TUNING/SEEK/SELECT knob to the "Factory reset". Press the
TUNING/SEEK/SELECT knob.
Rotate the TUNING/SEEK/SELECT knob to select between "Yes" or "No".
5.
Select "Yes" if you wish to reset the radio, otherwise, select "No".
6. Press the TUNING/SEEK/SELECT knob to cause the factory reset.
7. A full reset will be performed. All presets and the station list will be erased. All
settings will be set to the default values.
The display will the Perfect Pro logo for a few seconds, and then the radio will
automatically perform an auto scan of the Band III DAB channels and the FM band.
GB
20