Troubleshooting; Power Indicator Is Not Illuminated; Fuse Replacement; No Sound - Rotel A14 Manuel De L'utilisateur

NOTE: It is recommended to Reset Factory Defaults after the software
update is complete.
• PC-USB VERSION: This shows current loaded software version for PC-USB
processor.
• FACTORY DEFAULT: This sets the unit back to the original state as when it
left the factory. Press the "+" button on the front panel or the ENT button
on the remote control to enter factory reset setting. And then press the "+"
button or ENT again to begin reset, or press the MENU button to cancel.
NOTE: All previously configured options will be erased and reset to
the factory default settings.

Troubleshooting

Most difficulties in audio systems are the result of incorrect connections, or
improper control settings. If you encounter problems, isolate the area of the
difficulty, check the control settings, determine the cause of the fault and
make the necessary changes. If you are unable to get sound from the unit,
refer to the suggestions for the following conditions:

Power Indicator Is Not Illuminated

The Power Indicator and the basic items in the Display window should be
illuminated whenever the unit is plugged into the wall power outlet and the
Power button is pushed in. If it does not illuminate, test the power outlet with
another electrical device, such as a lamp. Be sure the power outlet being
used is not controlled by a switch that has been turned off.

Fuse Replacement

If another electrical device works when plugged into the power outlet, but
the Power Indicator still will not illuminate when the unit is plugged into
the wall outlet, it indicates that the internal power fuse may have blown.
If you believe this has happened, contact your authorized Rotel dealer to
get the fuse replaced.

No Sound

Check the signal source to see if it is functioning properly. Make sure the
cables from the signal source to the amplifier inputs are connected properly.
Be sure the Input Source is set to the proper input. Check the wiring between
the amplifier and the speakers.

Playable Audio Formats

USB Apple (iPhone, iPod, iPad)
Format
Any supported file loaded to Apple device. Phone may
Any suppor ted file
resample depending on stored format. May exclude
Apps designed to play formats not originally supported
loaded to Apple device.
by the sending device.
APTX Bluetooth
Format
Any format supported May exclude Apps designed to play formats not originally
by the sending device. supported by the sending device.
PC-USB
Format
Any supported format by the PC software
Format determined
PCM Audio:
by the Media Player/
44.1k, 48k, 88.2k, 96k, 176.4k, 192k, 384k
Server software that
(16 bit, 24 bit and 32 bit)
you use.
DSD64 and DSD128
Coax/Optical
Format
44.1k, 48k, 88.2k, 96k, 176.4k, 192k
SPDIF LPCM
16 bit, 24 bit

Cannot Connect via Bluetooth

If you cannot pair your Bluetooth enabled device to the A14, delete the
memory of the previous connection on your device. On your device this is
often listed as "Forget this Device". Then try to make the connection again.
17
Notes
Notes
Notes
Notes