SLAT SON 24V 12A MS150 RACK Notice D'utilisation page 27

Congratulations,
You have just acquired an emergency power supply by SLAT, and we thank you for your choice.
This manual includes instructions for the installation, commissioning and maintenance of this equipment.
In order for the equipment to work properly, we recommend that these instructions be followed very carefully.
This equipment is designed to be connected to the 230 V public distribution network.
To avoid any risk of electric shock, all INTERVENTIONS must be carried out with DISCONNECTED MAINS
SUPPLY.
An easily accessible isolating switch must therefore be installed outside of the cabinet. A bipolar isolation
switch must be installed likewise in the batteries circuit.
Interventions with the equipment switched on are authorized only when it is impossible to switch the
equipment off. The operation must only be performed by qualified personnel.
Standards, directives and protection of the environment and public health
This product is compliant with LV and EMC directives (immunity and emission).
It is compliant with standards:
•
EN 60950-1 (2006) + A11 (2009) + A1 (2010) + A12 (2011) + A2 (2013) (TBTS class)
•
EN 62368-1 (2020)
•
EN 61000-6-1(2007), EN 61000-6-2 (2005), EN 61000-6-3 (2007), EN 61000-6-4 (2007) + A1 (2011)
•
EN 55032 classe B (2015).
It is also compliant with the following trade standards:
•
EN 54-4 (1997) + A1 (2002) + A2 (2006): Fire detection and fire alarm systems. Part 4: power supply
equipment.
•
EN 12101-10 class A (2005) : Smoke and heat control systems. Part 10: power supplies
The DoP numbers are: 1116-CPR-089 (24V) and 1116-CPR-088 (48V).
Year of CE marking: 2011.
SLAT is ISO 14001 certified since 2008.
SLAT manufactures all its products in accordance with RoHS and WEEE environmental directives.
SLAT recycles its products at the end of their service life through its recycling programme.
(1)
1116
(1) Conformity of the product with the requirements of the European directives.
CNPP Cert. is the notified body No 1116.
(2) Compliance with the European Directive restricting the use of certain hazardous substances in
electrical and electronic equipment.
(3) Disposal of the product in an appropriate collection and recycling structure.
This product should not be disposed of with household waste.
(4) Recyclable Product
Our warranty is three years from the date of delivery (ex-works). It is strictly limited to reimbursement or
replacement (at our discretion and without compensation of any sort) of parts recognised as faulty by our
services, following return of the product to our premises at the buyer's expense. The
replacement or repair of equipment is possible only on our premises. In order to allow our
customers to benefit from the latest technical improvements, SLAT reserves the right to
make all necessary modifications to its products. The battery is not included in the
warranty.
Good installation.
Safety precautions
(2)
Warranty
27
(3)
(4)