Güde GFS 1255 B Traduction Du Mode D'emploi D'origine page 28

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34
ENGLISH
24
Technical Data
Lawn Trimmer
Art. No
Contents
Motor output
Engine speed
min
Max. Cutting speed
Ø-Cutting width
tank capacity
Fuel mix
Weight (without fuel, cutting tool and guard,)
Noise details
Sound pressure level L
Measured sound power level L
Guaranteed sound power level L
Measured according to
Wear ear protectors!
Vibration details
Total vibration values (triaxial vector sum) Determined properly EN ISO 11806
Vibration emission value a
Uncertainty K = 1,5 m/s
WARNING: The vibration emission level will vary because of the ways in which a power tool can be used and
may increase above the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down
or when it is running but not actually in use. This may significantly reduce the vibratory load over the total
working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm, organisation of work patterns.
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
In case of any doubts about connection and operati-
on refer please to our customer center
1)
pA
1)
WA
2)
WA
1)
EN ISO 11806;
h
2
Read and understand the operating
instructions before using the
appliance. Familiarise with the
Knife
Thread
Knife
Thread
2)
2000/14/ EG; Uncertainty K = 3 dB (A)
Use the appliance only outside, never use it in
confined and bad ventilated areas.
Specified Conditions Of Use
Lawn trimmer for treating and cutting natural grass
plots and low bushes.
The garden appliance has only been designed to cut
grass and weed in gardens and along seed beds and
borders in private house gardens and hobby gardens.
GFS 1255 B
95164
3
42,7 cm
1,25 kW / 1,7 PS
7500 min
-1
6750 min
-1
6000 min
-1
255 mm
420 mm
1 l
1:40
9,1 kg
90,7 dB (A)
111,5 dB (A)
114 dB (A)
2
7,5 m/s

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

95164

Table des Matières