Introduction - Gorgy Timing LEDI Mode D'emploi

This document is a user's guide for the LEDI Network ITS
Network NTP Server
their outputs and dual synchronization inputs (such as GPS, NTP, IRIG B AC, IRIG B DC)
and dual power supply (230vAC and 18-72vDC). The core of time base is made with a
10-9 high accurate OCXO.
The purpose of these devices is to synchronize one or several product using a synchro-
nization signal, such as IRIG B DC, IRIG B AC, NTP, DCF or configurable Pulse (PPS,
PPM...), RS232, RS422, RS485. Using the LEDI Network ITS
LEDI Network NTP Server
► You can use the installed network architecture with the well-known protocols
Ethernet+TCP/IP.
► Simplified set-up.
► Easy remote configuration and diagnostic.
► The product is a 19" 1U rack that can be easily installed on your installation.
► It provides up to 12 configurable outputs in 1U for the ITS and 16 for the DCLS.
► 4 configurable and independent outputs per card.
☛
MDE-LEDInetworkITS-server-4078V1.3
. These products are accurate time centers, easily configurable with
®
provides you with several advantages:
®
Jump directly to section 1.1. for quick installation
1.

INTRODUCTION

, LEDI Network DCLS
®
, LEDI Network DCLS
®
and LEDI
®
and
®
69