Gorgy Timing LEDI Mode D'emploi page 93

DESCRIPTION
The bottom part of the screen shows the current configuration used by the NTP client
software :
It shows the different servers used for synchronization and the current synchronization
mode (on the screenshot above, there is only one server at IP address 192.168.10.202).
In addition, this screen part shows what is the server currently used for synchronization
(with a frame labeled Active). If a commutation is in progress, the label Trying is dis-
played nears the related NTP server.
The middle part of the NTP screen allows you to configure the synchronization mode
and the NTP servers used:
If you select the checkbox auto-detection, the LEDI Network ITS try to use the NTP
servers present on your network and use the more appropriate synchronization mode.
If you don't select the checkbox auto-detection, you have to indicate the synchroniza-
tion mode and the NTP servers to use.
MDE-LEDInetworkITS-server-4078V1.3
4. WEB INTERfaCE
93