The Ntp Software; A/ Ntp Client Software States - Gorgy Timing LEDI Mode D'emploi

1.3.3. The NTP software

A/ NTP client software states

Here are the different states of the NTP client software:
Searching servers
Auto-detec on
Learning
environment
Here is a description of these states:
Starting:
►
The software is starting, it initializes and check the hardware if needed.
► auto-detection:
Server auto-detection is activated. The NTP client tries to find Gorgy Timing ser-
vers. At least one detected server is required to leave this state.
► Learning:
The NTP client software has found one or several Gorgy Timing (auto-detection ac-
tivated) or works with configured servers. In this state, the software learns network
properties. About 2 minutes are required to complete this stage.
► Tracking:
Normal behavior, the NTP client permanently evaluate its offset and drift with the
server.
► Commuting:
Not enough reply received from current server, trying another server.
76
Star ng
Learning
environment
Learning
Enable outputs
No reply
Tracking
Commuta on OK
Commu ng
MDE-LEDInetworkITS-server-4078V1.3