Change The Settings; Ntp Server Output Card Configuration - Gorgy Timing LEDI Mode D'emploi

2.2.3. Change the settings

Open the WEB site of the LEDI Network ITS/DCLS/NTP Server (see part 5). Click on
the Output button. The current configuration of your product appears at the screen .
In this screen you can tune each card independently (see page 31). When you have
changed the settings, click on the Submit button. The modification should appear
immediately at the outputs or on the display.

2.2.4. NTP server output card configuration

You can add a NTP server output card to your LEDI network ITS/DCLS. By this way,
you can synchronize your different local networks on several NTP servers, synchroni-
zing themselves on the same hardware reference.
The NTP server card has to be configured by the same way than the LEDI Network ITS/
DCLS. Its default network configuration is DHCP mode with identifier SCnnnnnn with
nnnnnn, the serial number on 6 digits.
The default SNMP name of the NTP server (that can be seen from a SNMP browser or
from a WEB browser) is NTPServnnnnnn with nnnnnn, the serial number on 6 digits.
To change the network parameters of the NTP server card, use the GTNetMng tool :
see page 14). Like the LEDI Network ITS/DCLS, the NTP server output card provides
a WEB page for fine configuration (see page 23) and a SNMP MIB for supervision
through the network.
84 MDE-LEDInetworkITS-server-4078V1.3