Progress PBK3360 Notice D'utilisation page 33

2. Remove the accessories from the appli-
ance.
3. Clean the oven floor with warm water
and washing-up liquid, then dry it.
4. Set the function
perature.
5. Let the empty appliance operate for one
hour.
6. When the appliance is cool, clean it with
a soft and moist sponge.
Warning! Do not clean the catalytic
surface with oven sprays, abrasive
cleaning agents, soap or other cleaning
agents. There is a risk of damage to
the catalytic surface.
Warning! Keep children away when
you clean the oven at a high
temperature. The oven surface
becomes very hot and there is a risk of
burns.
Discolouration of the catalytic surface
has no effect on the catalytic proper-
ties.
Oven lamp
Warning! Be careful when you change
the oven lamp. There is a risk of
electrical shock.
Removing the oven door and the glass panel
and maximum tem-
Before you change the oven lamp:
• Deactivate the oven.
• Remove the fuses in the fuse box or de-
activate the circuit breaker.
Put a cloth on the bottom of the oven
to prevent damage to the oven light
and glass cover.
1. Turn the glass cover counterclockwise
to remove it.
2. Clean the glass cover.
3. Replace the oven light bulb with an ap-
plicable 300 °C heat-resistant oven
light bulb.
Use the same oven lamp type.
4. Install the glass cover.
Cleaning the oven door
The oven door has two glass panels. You
can remove the oven door and the internal
glass panel to clean it.
The oven door can close if you try to
remove the internal glass panel before
you remove the oven door.
1. Open the door fully and hold the two
door hinges.
progress 33