Before Use - Hilti VC 20-U Mode D'emploi

6 Before use

CAUTION
en
The mains voltage must comply with the specification
given on the type identification plate. Ensure that the
appliance is disconnected from the electric supply.
DANGER
Connect the
earthed/grounded power sources.
CAUTION
Always check to ensure that the vacuum cleaner is
standing securely. Engage the castor brakes.
CAUTION
When fitting the top section of the vacuum cleaner,
take care to avoid pinching your fingers or damaging
the supply cord.
6.1 Use of extension cords and generators or
transformers
See section "Description / use of extension cords".
6.2 Operating the appliance for the first time 2
1. Open the two catches.
2. Lift the vacuum cleaner top section away from the
waste material container.
3. Remove the accessories and packaging from the
waste material container.
NOTE Use the class M version for picking up dusts
with an exposure limit value of ≧ 0.1 mg/m³. Fit a
filter fleece or plastic dust bag for mineral dust or a
paper dust bag for wood chips or shavings in the
container in accordance with the instructions.
NOTE When used to pick up harmless dusts: Fit a
plastic dust bag in the container in accordance with
the instructions (see printed instructions).
4. Fit the vacuum cleaner top section onto the waste
material container.
5. Close the two catches.
6. Check to ensure that the vacuum cleaner top section
is fitted correctly and secured.
7. Connect the suction hose to the appliance.
24
appliance only to
6.2.1 Fitting a paper dust bag for picking up wood
chips or shavings 3
1. Open the two catches.
2. Lift the vacuum cleaner top section away from the
waste material container.
3. Place the new paper dust bag in the waste material
container.
4. Fit the vacuum cleaner top section onto the waste
material container.
5. Close the two catches.
6. Check to ensure that the vacuum cleaner top section
properly
is fitted correctly and secured.
7. Connect the suction hose to the appliance.
6.3 Power conditioner
CAUTION
When placing the power conditioner in the cradle
check that the power outlet faces upwards and the
spring catch engages.
CAUTION
To avoid injury, remove the power conditioner and any
loose accessories from their attachment points be-
fore emptying the container and before transporting
the vacuum cleaner.
6.4 Transport
DANGER
With vacuum cleaners of the class M, take care to
ensure that the hose socket cap is fitted when the
appliance is transported or not in use.
DANGER
The appliance may be moved or transported only
when the motor has come to a complete stop.
Do not carry the appliance when it is full of waste material.
Empty the appliance before carrying it to another location.
Do not tip the appliance or lay it on its side for transport
after using it to collect water.
The tapered adapter can be used to connect both ends
of the hose together for transport.