Assembly Instructions - BH LK700 Core Rower Mode D'emploi

ASSEMBLY INSTRUCTIONS

STEP 1: Attaching the Main Frame to the
Front Support
Use 4-(K04) Screws, 4-(K05) Spring
Washers, and 4-(K16) Washer to attach the
(A) Main Frame to the (B) Front Support.
Tighten securely.
STEP 2: Attaching the Rail to the Rear
Support and assembling the Seat
Attach the (C) Rear Support to the (D)
Rail, using 4-(K04) Screws, 4-(K05) Spring
Washers, and 4-(K16) Washers. Tighten
securely. Slide the (E) Seat onto the (D)
Rail, then install the (K) Rail end cap with
4-(K17) Phillips Screws. Tighten securely.
STEP 3: Connecting the Rail to the Main
Frame
Take the Rail Assembly (A) and slide it
A
on to the Main Frame (D). Secure the rail
on the side with 3-(K07) Hollow Screws,
3-(K11) Spring Washers, 3-(K06) Washers
and 3-(K08) Bushing screws. Secure the
bottom of the rail with 4-(K04) Hex
Screws (Steel), 4-(K05) Spring Washers and
4-(K16) Washers. Tighten Securely.
15