BH LK700 Core Rower Mode D'emploi page 16

STEP 4: Connecting and Mounting the
Computer Console
Connect the (H21) Generator Wire (upper) to
the (B11) Generator Wire (lower). Then connect
the (H23) Computer Wire (upper) with the
(H25) Computer Wire (lower).
A
After the Computer Console connections are
made, attach the computer console to the console
mast on the Frame (A) with 4-(K03) Phillips
Screws (ST). Make sure not to pinch the cables
and then tighten securely.
STEP 5: Attaching the Pedal Assembly
Bring the Pedal Assembly (F) under the Main Frame (A) and align the holes on the Pedal
Assembly (F) to the Main Frame (A). Attach the Pedal Assembly to the Main Frame with
4-(K-10) Hex Screws, 4-(K09) Washers, and 2-(K12) Hex Screws.
Once the Pedal Assembly is connected, attach the Foot Pedal Rear Cover (G) with 6-(K02)
Phillips Screw (Stainless). Tighten securely.
A
16