BH LK700 Core Rower Mode D'emploi page 17

STEP 6: Installing the Cosmetic Covers
Connect the larger Plastic Cover (I) to the smaller Plastic Cover (J). There are 2 notches on
the Plastic Cover (I) that the two posts on the underside of the Plastic Cover (J) seat into.
Fold up the Plastic Cover (I) and slide the bottom part of the Plastic Cover (I) onto the
front of the Rail (D). There are 4 small tabs that slide under the lip of the Rail (D). Next,
slide the Plastic Cover (I) back and then align the holes in the Plastic Cover (J) with the
holes in the Main Frame (A). Secure with 2-(K01) Phillips Screw (stainless).
A
D
17