Removing/Fitting A Heel Strap; Removing/Fitting The Seat Plate; 6 Transport; 6.1 Safety Information - Aquatec Ocean Mode D'emploi

Transport

5.4 Removing/fitting a heel strap

1. Open the Velcro®strip
E
2. Remove the screw from the underside of the footplate.
F
3. Remove the heel strap from the flexible plastic pin.
Attach the strap using the same procedure in the reverse order.
IMPORTANT
When installing ensure that the Velcro®strip of the heel strap
is facing backwards.

5.5 Removing/fitting the seat plate

Removing:
1. Pull the seat plate upwards on both sides.
Fitting:
CAUTION Risk of getting fingers caught
▸ Do not insert fingers between the seat surface and the seat
frame when pressing down on the seat plate.
1. Place the seat plate on the seat frame with the cutout to the front.
2. Push the seat plate backwards as far as it will go.
3. With your hand flat, press the seat plate down at the sides and then
at the front and back until the seat plate snaps into the seat frame.
6 Transport

6.1 Safety information

The product can be dismantled for transport into the parts of
i
the scope of delivery (Section 3.1 Components).
▸ Disassemble the product, see Section 4 „Assembly and
installation".
IMPORTANT
▸ Self locking screws, nuts or thread locking adhesive are used
for several connections. If these are loosened, they must be
replaced by new self locking screws, nuts or they must be
secured using new thread locking adhesive.
on the heel strap.
Shower and Toilett Commode Ocean / Ocean XL
7 Maintenance

7.1 Maintenance and inspection

If the cleaning and safety notices provided are observed, the product
will be maintenance free.
▸ Check product and accessories regularly for damage and to ensure
that it is securely assembled.
▸ In the event of damage and/or likely repairs, contact the dealer
immediately.
▸ The product must be checked by an authorized dealer before every
re-use or after 24 months at the latest (see Manufacturer's recom-
mendation for rehab products of the SPECTARIS industrial associa-
tion).

7.2 Cleaning and disinfection

The product can be cleaned and disinfected using commercially availa-
ble agents.
IMPORTANT
In the sensitive area of the bathroom, hygiene is particularly
important.
▸ Keep the product clean at all times and wash it regularly.
1. Disinfect the product by wiping down all generally accessible sur-
faces with disinfectant (after disassembling the product, if possible).
IMPORTANT
All cleaning agents and disinfectants used must be effective,
compatible with one another and must protect the materials
they are used to clean. For further information on decon-
tamination in Healthcare Environments, please refer to 'The
National Institute for Clinical Excellence' guidelines on Infec-
tion Control www.nice.org.uk/CG139 and your local infection
control policy.
▸ Clean by hand.
▸ Clean without scouring agent.
13