Lithium-Powerpack; Scope Of Delivery; Specifications; Safety Precautions - APA 16558 Mode D'emploi

process easier when it is dark, or can be used in flashing
mode as a warning light. A battery charge enables up to
10 starting aid processes to be carried out, depending on
battery status and vehicle.
With the help of the 12 V output, the data of the on-board
computer can be backed up during a battery change.
This device is not designed to be used by children or
persons with limited mental abilities or without experience
and/or lack of required specialist knowledge. Keep children
away from the device. The device is not designated for
commercial use.
Utilisation according to the intended purpose also includes
the observation of all information in these operating inst-
ructions, particularly the observation of safety instructions.
Any other utilisation is considered to be counter to the
intended purpose and may result in material damage
or personal injuries. EAL GmbH assumes no liability for
damage resulting from improper use.

2. SCOPE OF DELIVERY

1 x Lithium power pack
1 x Instructions

3. SPECIFICATIONS

Plug charger:
Input: ____________ 220 – 240 V AC, 50/60 Hz
Output: ___________ 12 V DC, 0,8 A
Cable length: _______ 1.80 m
Vehicle charging cable:
Fuse: ____________ Fast-blowing, 12 A, 250 V,
Cable length: _______ 1.10 m
Lithium power pack:
Battery type: _______ LiFePo – Lithium iron phosphate
Capacity: _______ 12000 mAh (4 cells, each 3000 mAh)
Starting aid: _______ Suitable for motors with up to
_______ 3000 ccm capacity
Max. continuous
current/peak current: _ 300 A / 600 A
Length of starting aid
cable: _______ 0.22 m
Switch on temperature
for automatic warming
(PRE HEAT): ______ > 0 °C (> 32 °F)
Outputs: _______ 1 x USB, 5 V, 2.0 A
_______ 12 V DC, 8 A
Protective features: ___ Overheating protection, overloading
protection, short-circuit protection,
reverse voltage protection
Relative humidity: ___ relative 20 % - 90 %
Permitted ambient
temperature rangeduring
use: _______ -20 °C to + 45°C (-4 to 113 °F)
8
1 x Plug charger
1 x 12 V vehicle charging cable
Ø6 x 30 mm
Permitted ambient
temperature range
during storage: _____ 0 °C to + 45°C (32 to 113 °F)
Dimensions: _______ 150 x 200 x 60 [mm]
Weight: _______ 0.980 kg
Illumination: _______ Ultra-bright LED

4. SAFETY PRECAUTIONS

• The warning triangle labels all instructions
important to safety. Always follow these,
otherwise you could injure yourself or
damage the device.
• Children may not play with the device.
• Cleaning and user maintenance may
not be carried out by children without
supervision.
• Do not treat packaging material carelessly.
It may become a dangerous plaything for
a child!
• Only use this product for its designated
purpose!
• Do not manipulate or disassemble the
device!
• For your own safety, only use accessories
and spare parts that are stated in these
instructions or that are recommended by
the manufacturer!
• Caution: Do not leave the device
unattended when charging! Use a fire-
resistance surface, do not allow flammable
materials within a distance of 1m.
• If you are not familiar with the electrical
system of your vehicle, or are not confident
enough to carry out the starting aid
process yourself, do not use the device.
Instead, obtain professional aid, ask your
vehicle manufacturer or commission a
breakdown service.
• Read the operating instructions for your
vehicle!
• For some vehicle types, it is possible that
special precautions must be implemented
before using a starting aid with the vehicle
(e.g. fuses that must be removed, or certain
safety precautions that must be taken).
With some vehicle types, the battery is
located in the boot. With such vehicles,
you will often find starting aid connections
under the bonnet.
• This starting aid system is only
intended for operation on 12V
systems. DO NOT ATTEMPT to use the