Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Contents
Guarantee
Safety instructions
Caution: Never heat up any medium with ignition point higher than the
adjusted safety temperature limit. Value for safety temperature limit see
chapter „Technical data".
RET cv 0498
The instrument may not be operated in rooms with explosion hazard.
Furthermore, it has to be placed upon a fire-proof and/or not burnable
surface.
Page
Please make sure that the mains cable does not contact the heating plate!
2
15
Attention - Magnetism! Effects of the magnetic field have to be taken
15
into account (e.g. data carriers, cardiatic pacemakers ... ).
16
16
When using PTFE-coated magnetic bars, the following has to be noted:
16
Chemical reactions of PTFE occur in contact with molten or dissolved alkaline
and alkaline - earth metals, as well as with fine-particled powders of metals of
17
18
the 2. and 3. group of the periodical system at temperatures above 300-
19
400°C.
Only elementary fluorine, chlorine trifluoride und alkaline metals do attack
20
20
PTFE, halogen hydrocarbons have a reversibly swelling effect.
21
Source: Römpps Chemie-Lexikon and „Ullmann" Bd.19
22
Exercise caution when touching the housing parts and the
22
heating plate!
23
Risk of burns!
23
ratures in excess of 300°C.
23
25
Please consider possible endangering due to release of toxid or flamable
25
gaser caused by heated medium.
25
26
26
26
Correct use
42
43
The IKAMAG RET control visc is a heating instrument with stirring
function. It is used in e.g. laboratories of the chemical industry, in
schools as well as in pharmacies. The instrument is suitable for
tempering substaces which are placed on the heating plate in ves-
sels. By means of a built-in stirring drive and with the help of a
magnetic bar within the vessel, the substances can be stirred at
the same time. The mixing intensity is dependent on the motor
speed and on the size of the magnetic bar.
The heating plate can reach tempe-
15
Publicité
Chapitres
Table des Matières
