Pc 5.1 Adapter Ika-Control; Pc 2.1 Pc-Cable; Maintenance And Cleaning - IKA IKAMAG RET control visc Mode D'emploi

Further Instructions:
RMP_LOOP_SET_X
X=1;4
RMP_LOOP_RESET_X
X=1;4
IN _TYPE
IN_NAME
OUT_NAME name

PC 5.1 Adapter IKA-Control

An adaptor cable is available as an accessory part. It splits the ana-
log and serial signals. The analog output signals are allotted to a 7-
polar coupling according to the NAMUR-recommendation; the
serial signals to a 9-polar Sub-D-bushing plug (RS 232 C).
3 5
5
3
7
2 temperature
3 analog GND
5 Speed /
viscosity trend
RET cv 0498
To work off the ramps in one
loop
Ending of ramp loop
Requiring identification of
laboratory instrument
Requiring the designation name
Output of designation name
(max. 6 digits,
default: IKAMAG)
7 8
2 3
5
2
2
4 1
1
6 9
6

PC 2.1 PC-Cable

For connecting the 9-polar bushing with an PC, a PC-cable is requi-
red.
1
RxD 2
magnetic
TxD 3
4
stirrrer
GND 5
= plug 6
RTS 7
CTS 8
9

Maintenance and cleaning

The IKAMAG RET control visc is maintenace-free. It is subject only to the
natural wear and tear of components and their statistical failure rate.
When ordering spare parts, please give the manufacturing num-
ber shown on the type plate, the machine type and the name of
the spare part.
Please send in equipment for repair only after it has been cleaned and
is free from any materials which may constitute a health hazard. Use
only cleansing agents which have been approved by IKA to clean IKA devi-
ces. To remove use:
Dyes
Construction materials water containing tenside / isopropyl alcohol
Cosmetics
5
Foodstuffs
Fuels
2 R x D
For materials which are not listed, please request information from IKA.
3 T x D
Wear the proper protective gloves during cleaning of the devices.
Electrical devices may not be placed in the cleansing agent for the purpo-
5 RS 232 GND
se of cleaning.
7 RTS
mended method for cleaning or decontamination, the user must ascertain
8 CTS with the manufacturer that this method does not destroy the instrument.
1
2 RxD
PC
3 TxD
4
(processor)
5 GND
6
= bushing
7 RTS
8 CTS
9
isopropyl alcohol
water containing tenside / isopropyl alcohol
water containing tenside
water containing tenside
Before using another than the recom-
25