Beta 1899A Mode D'emploi page 13

INSTRUCTIONS FOR USE
The life of quick couplers is affected by the following factors:
- the number of times the couplers are connected and disconnected;
- the cleaning product that remains in prolonged contact with the O-rings of the couplers. This liquid oxidizes and forms
a viscous film or eat into the rubber of the O-rings;
- weathering: water, salt and acids eat into metals;
- dust and dirt may cause abrasion to the moving parts..
Take the following steps, to extend the life of these parts as much as possible:
- always use the PURGE function to empty both the liquids out of the pipes and fittings;
- do not expose the machine to any external agents, including rain and salt;
- lubricate the quick couplers when not in use for prolonged periods of time, before fitting them in;
- if some hardening should be shown anyway, the couplers will be treated with a layer of silicone, which can be restored by
spraying LUBRICATING SILICONE.
Extraordinary maintenance
Any extraordinary maintenance and repair jobs other than those described above must be carried out by authorised personnel
only; please contact Beta Utensili S.p.A.'s repair centre.
DISPOSAL
The CLEANING MACHINE must be disposed of in accordance with the law provisions in force in the country of use.
Liquid disposal
Liquid residues must be disposed of in accordance with current law provisions and the information contained in the Safety Data
Sheet (SDS).
WARRANTY
This equipment is manufactured and tested in accordance with current EU regulations, and is covered by a 12-month warranty for
professional use and a 24-month warranty for non professional use respectively.
We will repair any breakdowns caused by material or manufacturing defects by fixing or replacing the defective pieces or replacing
them at our discretion. Should assistance be required once or several times during the warranty period, the expiry date of this
warranty will remain unchanged. This warranty will not cover defects due to wear, misuse or breakdowns caused by blows and/or
falls. In addition, this warranty will no longer be valid if any changes are made, or if the cleaning machine is forced or sent to the
customer service in pieces. This warranty explicitly excludes any damage to people and/or things, whether direct or consequential.
DECLARATION OF CONFORMITY
We hereby declare, assuming full responsibility, that the described product complies with all the relevant provisions of the
following Directives:
• Machine Directive 2006/42/EC
• LVD Directive 2014/35/EU
• EMC Directive 2014/30/EU
• RoHS Directive 2011/65/EU.
The Technical Brochure is available at:
BETA UTENSILI S.P.A.
Via A. Volta 18,
20845 Sovico (MB)
ITALY
Product approved and tested also by

EN
13