PowerPeak Home Trainer Ergometer Mode D'emploi page 26

Step 7: assembling the handlebar cover
Place the T‐shaped knob (11) in the cover (16). Then place the tube spacer (10), spring washer (7) and
washer (9) on the T‐shaped knob. Secure the covers (14 + 16) with two screws (12) and four bolts (15).
Step 8:
When the installation is complete carefully check and ensure all the screws and nuts are fastened firmly.
Step 9: assembling the adaptor
The adaptor must be connected to the back of the device.
26