PowerPeak Home Trainer Ergometer Mode D'emploi page 24

Step 3: assembling the saddle
Attach the seat (76) to the seat support (73) with washers (88) and nylon nuts (89).
Attach the seat support (73) on the seat post (68) and secure with the washer (70) and knob (69).
Put the seat post (68) in the main frame (43) and secure the seat post (68) with the knob (57).
Step 4: assembling the handlebar post and connecting the hand pulse cable
Put the handlebar post (18) in a vertical position. Place the plastic cover (19) over the lower part of the
handlebar post (18). Keep the upper hand pulse cable (22) hanging from the handlebar post until it is
connected.
Connect the upper hand pulse cable (22) with the lower hand pulse cable (23).
Put the handlebar post (18) in the main frame (43) and secure the handlebar post (18) with four screws
(20), washers (21) and washers (26).
24