Installation Instructions; Prepare Cabinet Opening-Existing Utilities; Prepare Cabinet Opening-New Utilities - Maytag W10290309A Instructions D'installation

INSTALLATION INSTRUCTIONS

Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
1 Disconnect power
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
2
3
Do you already have utility
hookups?
Yes
—Follow instructions in the "Prepare Cabinet
Opening—Existing Utilities" section.
No
— Follow instructions in the "Prepare Cabinet
Opening—New Utilities" section.
Existing utility hookups
Water line a a a a
Cable
6
No existing utility hookups
Prepare Cabinet Opening—Existing
Utilities
1
Check water and electrical
placement
Water line
If the water line and the cable extend to the locations shown,
proceed to the "Install Drain Hose" section. If they do not reach far
enough, follow the instructions in the "Prepare Cabinet Opening—
New Utilities" section.
Prepare Cabinet Opening—New
Utilities
Prepare and route the electrical supply
What type of electrical
connection will you use?
Power Supply Cord:
Follow Option A instructions
Direct Wire:
Follow Option B instructions
Option A, Power Supply Cord:
NOTE: A grounded 3 prong outlet is required inside a cabinet
next to the dishwasher cabinet opening.
1 Power Supply Cord-Drill hole
"
1¹⁄₂
(3.8 cm)
Drill a 1¹⁄₂" (3.8 cm) hole in cabinet side or rear.
See product and cabinet opening dimensions.
Cable
Optional location Optional loc ation Optional loc ation
Preferred location Preferred loc ation Preferred loc ation