Pulsar TRAIL LRF XQ28 Mode D'emploi page 10

Menu contents and description
Wi-Fi Wi-Fi ON/OFF
Press and hold down the М (4) button to enter the
=
Off
main menu.
Select the desired menu option with the
=
UP (3)/DOWN (5) buttons.
On
Turn Wi-Fi on/off with a short press of the M
=
button.
You can also turn Wi-Fi on/off with a long press of
=
the UP (3) button during operation.
Mode
Enhanced contrast mode.
Perfect for viewing animals against the background
Rocks
of rocks, ground in mountain areas.
Low contrast mode
Forest
Perfect for viewing animals against a background of
vegetation.
Universal mode for various modes of observation.
Hold down the M (4) button to enter the main
=
menu.
Graphics
Select submenu with UP (3) and DOWN (5)
=
brightness
buttons.
Press briefly the M button the enter the submenu.
=
1
Set the desired graphics brightness (menu and
=
. . status bar icons) from 0 to 10 with UP/DOWN
. .
buttons.
. .
. .
Confirm your selection with a short press of the M
=
.
button.
Calibration
13
Enter the main menu with a long press of the M (4)
=
button.
Enter the submenu with a short press of the M
=
button.
Select one of the below calibration modes with
=
UP (3) and DOWN (5) buttons.
Confirm selection with a short press of the M
=
button.
A
SA
M
Wi-Fi setup.
This menu option allows you to set up your sight for
WiFi settings
operation in a Wi-Fi network.
Password
This submenu allows you to set a password to
setup
access your thermal sight from an external sight.
The password is used to connect an external sight
(i.e. smartphone) to your thermal sight.
Enter the main menu with a long press of the M (4) button.
=
Enter the submenu "Wi-Fi" with a short press of the M button.
=
The default password ("12345") will appear on the screen. After
=
firmware update the Wi-Fi password will be changed to "12345678".
Set the desired password with the UP (3) and DOWN (5) buttons
=
(button UP to increase value; button DOWN to reduce). Switch between
digits with a short press of the M button.
Save the password and exit the submenu with a long press of the M
button.
Access level
This submenu allows you to set required access
setup
level of the Stream Vision application to your sight.
Access level Owner. The Stream Vision user has
=
the complete access to all sight's functions.
Owner
Access level Guest. The Stream Vision user has
Guest
=
the access only to the real time video stream from
the sight.
Enter the main menu with a long press of the M (4) button.
=
Enter the submenu with a short press of the M button.
=
Set the desired access level with the UP (3) and DOWN (5) buttons.
=
Save your selection and exit the submenu with a long press of the M
=
button.
14