Publicité
Les langues disponibles
Les langues disponibles
ZEROING
The sight features two zeroing methods - "one shot" zeroing and using
FREEZE function.
Zeroing should be done at operating temperatures, by following the order
of these steps:
Mount the rifle with the sight installed on a bench rest.
Set a target at a certain distance.
Adjust the sight according to the instructions of section "Powering on
and image setup".
Select the zeroing profile (see main menu option «Zeroing
Profile»
)
Aim the firearm at the target and take a shot.
If the point of impact does not match the aiming point (centre of the
sight's reticle), hold down the M (4) button to enter the main menu.
Enter the submenu "Zeroing"
Set the zeroing distance value (see main menu option "Zeroing" =>
submenu "Add new distance"
Enter the submenu with a short press of the M button
Select icon
with UP(3)/DOWN (5) buttons. Press briefly the M
button.
Additional menu for zeroing parameters setup appears on
the display
An auxiliary cross
appears in the centre of display,
and coordinates of the auxiliary cross X and Y appear in
the top right corner (see Pic. 5).
Select icon
with UP/DOWN buttons. Press briefly the M button.
Holding the reticle in the aiming point, move the auxiliary cross
horizontally or vertically with UP/DOWN buttons relative to the reticle
until the auxiliary cross matches the point of impact.
9
with a short press of the M button.
).
0
Save the new position of the
reticle with a long press of the
М button. Message "zeroing
coordinates saved" confirms
successful operation.
Menu exit takes place. The reticle will now move to the point of impact.
Exit the submenu,take another shot - the point of impact should now
match the aiming point.
INCREMENTAL DIGITAL ZOOM
The sight allows you to quickly increase the basic magnification (please
refer to the "Digital zoom" line in the specifications table) by two times
or four times (8 times in XP models), as well as to return to the basic
magnification. To operate the incremental digital zoom, press
successively the DOWN (5) button.
A100m
windage
x=31.00
y=26.00
10
Publicité
