Télécharger Imprimer la page

Pulsar TRAIL LRF XQ28 Mode D'emploi page 9

Publicité

Les langues disponibles

Les langues disponibles

The Quick menu allows change of basic settings (display brightness and
contrast, incremental digital zoom, information on the actual profile and
zeroing distance).
Enter the menu with a short press of the М (4) button.
To toggle between the functions below, press successively the M
button.
Brightness
– press the UP (3) and DOWN (5) buttons to change
display brightness from 00 to 20.
Contrast
– press the UP/ DOWN buttons to change display
contrast from 00 to 20.
Digital zoom
- press the UP/ DOWN buttons to change digital
zoom from 1.0x to 4.0x (or 8.0x in XP models). Continuous digital
zoom is in 0.1x increments.
The initial value of the continuous digital zoom is x1.0 if the discrete
digital zoom is not active; x2.0 is discrete digital zoom is 2x; x4.0 is
discrete digital zoom is 4x; x8.0 is discrete digital zoom is 8x.
- information on the actual profile and zeroing distance, at
A100
which zeroing was done in this profile (for example, profile A, zeroing
distance 100m).
Toggle between zeroing distances with the UP (3) and DOWN (5)
buttons.
Enter the main menu with a long press of the М (4) button.
Press the UP (3) and DOWN (5) buttons to toggle between the main
menu options.
Main menu navigation is cyclical: as soon as the last menu option of
the first tab is reached, first menu option of the second tab starts.
Enter a submenu of the main menu with a short press of the М button.
Exit the submenu with a long press of the М button.
Automatic exit takes place in 10 sec of inactivity.
11
Upon exit from the menu the cursor location
for the duration of the working session (i.e. until the unit is turned
off). Upon restarting the sight and entering the menu the cursor will
be located on the first menu option.
MENU CONTENTS:
Wi-Fi ON/OFF
Mode
Graphics
brightness
Calibration mode
Wi-Fi settings
Zeroing profile
Reticle setup
Zeroing
Settings
LRF
Rangefinder
Microphone
Side incline
Auto shutdown
Defective pixel
repair
Remote Control
Device information
is memorized only
Wi-Fi activation
10
Automatic
General settings
12

Publicité

loading