External Audio Sources; Front Aux-In Socket; Rear Aux Input; Performing Settings In The Audio Menu - Blaupunkt San Francisco 300 Mode D'emploi Et De Montage

Opera- Display
tion
T 01 02:15
CDC T 01 18:33
CD 02T 03
1
Artist and album name must be stored as
ID3 tag and are displayed only for approx.
10 seconds and perhaps as scrolling text;
otherwise, the fi le name is displayed.
Note
You can switch the display of CD text of an
audio CD on and off (see the ch. "User set-
tings", section "Performing settings in the
user menu", "CD TEXT" menu item). If CD text
is switched on, the corresponding CD text is
displayed once as scrolling text at the start of
a track.

External audio sources

Front AUX-IN socket

Danger! Increased risk of injury
from connector.
In case of an accident, the protruding
connector in the front AUX-IN socket may cause
injuries. The use of straight plugs or adapters
leads to an increased risk of injury.
For this reason, we recommend using angled
jack plugs, e.g. the Blaupunkt accessories cable
(7 607 001 535).
As soon as an external audio source, such as a
portable CD/MiniDisc or MP3 player is connected
to the Front-AUX-IN socket, it can be selected with
the SRC button 6. "FRONT AUX" then appears
on the display.
02_SanFrancisco300_gb_0309.indd 35
CD/MP3/WMA/C'n'C/CD changer mode | External audio sources

Rear AUX input

Meaning
Different external audio sources can be connect-
ed to the car sound system via the rear AUX input
Track number
(Rear-AUX-IN):
and playing time
• C'n'C-ready devices from the Blaupunkt ac-
Track number
cessories programme (e.g. a C'n'C-ready
and time
Bluetooth®/USB or iPod®/USB interface;
CD number and
C'n'C = Command and Control).
track number
• CD changer
• Other external audio sources, such as portable
CD players, MiniDisc players, MP3 players or a
non-C'n'C-capable Blaupunkt interface.
Note:
An adapter cable is needed to connect an
external audio source via the rear AUX input.
You can obtain this cable (Blaupunkt no.:
7 607 897 093) from your Blaupunkt dealer.
Before you connect a certain device, fi rst check
the mode of the rear AUX input and, if neces-
sary, change the setting (see ch. "User settings",
section "Performing settings in the user menu",
"CDC" menu item). Ensure that you change the
setting only as long as no device is connected
to the rear AUX input. If necessary, remove con-
nected devices fi rst while the car sound system is
switched off.
Starting C'n'C mode
Press the SRC button 6 repeatedly until
u
the name of the device connected via C'n'C
appears on the display.
The playback starts.
Notes:
•
•
•
The C'n'C mode can be selected only if a
suitable device is connected via a C'n'C-
ready interface.
To operate the radio in C'n'C mode, please
read the chapter "CD/MP3/WMA/C'n'C/CD
changer mode".
When using suitable adapter cables, you
can connect up to 3 C'n'C-ready Blaupunkt
interfaces to the car sound system. For the
car sound system to distinguish the differ-
26.03.2009 13:20:30 Uhr
35