Product Description - Sonoswiss DURA T 12/H Mode D'emploi

3.1 Functional principle
Cleaning time
The cleaning time depends on the type and degree of dirt, the cleaner and the temperature, as well as the cleaning progress.

4 PRODUCT DESCRIPTION

4.1 SW 140 / 220 Product features
• Ultrasonic tank made from special, high-cavitation-resistant stainless steel
• Oblique tank floor to allow easy draining of the cleaning liquid
• Sandwich performance transducer systems
• Ultrasound frequency can be switched manually between 28 kHz for rough cleaning and pre-cleaning, and 80 kHz for fine cleaning
• Permanent sweep function that continuously moves the sound pressure peaks and achieves a more homogeneous sound distribution in the tank.
• Temperature-controlled heating (30°C – 80°C) to avoid accidental permanent operation
• Automatic safety shut-down at a bath temperature of 90°C to protect the immersed items from excessive temperatures
• Housing made from stainless steel (grade 304/304L)
• Drain made from stainless steel (grade 304/304L) on the unit side
• Hinged folding cover
36 | EN
4.2 CE conformity
This ultrasonic cleaner complies with the CE marking criteria with regard to the EMC Directive 2004/108/EC as well as the
Low-Voltage Directive 2006/95/EC.
The Declaration of Conformity can be requested from the manufacturer.
4.3 RFI Declaration (European Union)
This is a Class A product.
For your information:
This unit has been approved for operation in commercial environments with regard to the suppression of radio interference.
In residential areas, it can cause radio interference due to stray radiation. In this case, appropriate measures must be taken to eliminate
the stray radiation. In this case, contact your dealer or the manufacturer of this unit.
4.4 Scope of delivery
• Ultrasonic cleaning unit
• Protective cover
• Instruction manual
4.5 Optional accessories
• Stainless steel basket (limited suitability for bulk goods)
• Set-up frame on wheels
EN | 37