Enabling / inhibiting a extension for all teams (log-in, log-out)
Proceed as follows in order to enable or inhibit your phone for all teams.
b
Lift up handset
Enable/Inhibit extensions
Activating the switching function for an internal extension
b
Lift up handset
Activate day mode / night mode
Follow me
Setting up or deleting an internal Follow me
b
Lift up handset
*1) Internal number whose calls are to be forwarded
Call will then be forwarded to the telephone, when this code was entered.
Block dialing (Austria)
b
*55
Lift up handset
*1) If you'd rather use a specific external ISDN connection or bundle,s enter the corresponding code.
*2) Begin dialing by pressing the key #. Only now is the call transferred to the exchange.
Modified code numbers
You can program your PABX with individual code numbers for the following features. Customizing the default PABX numeric code adds an
extension from the internal telephone number plan of the system.
Enter all changed code numbers in the table. Several different code numbers can be used for the features trunk group assignment, system
parked enquiry and activation of a door opener.
Feature
Line access digit
Picking up calls from within the group
Picking up calls for a specific extension
Speed dialing from the telephone directory
Assignment of project numbers for external
calls
Trunk group seizure (8 codes)
System parked enquiry (10 codes )
Activation of a door opener (4 codes)
The operation of the features whose code number has been changed remains as described. You can either use the changed code number (in-
ternal extension number) or the code given in the operating instructions (except for the line access digit).
*
#
943*
/
*
#
/
*
#
64
/
Set up / delete
Follow me
0
Line access digit
Default code number
0 (UK 9)
*1t#
*596
q
Ack. signal
91
Code number
Ack. signal
t
#
*1)
t
or
*1)
MSN extension number
*0
*#
*50
*8
*99
a
Replace handset.
q
a
Replace handset.
q
a
Ack. signal
Replace the handset
t
#
*2)
Changed code number
English
g
17