Operation - Funkwerk elmeg ICT8800 Mode D'emploi

Operation

Not all of the features described here may be implemented in the standard ISDN connection supplied by your network service provider.
Contact your service provider to determine which features come standard with your ISDN access and which ones you must apply for separa-
tely.
Making Calls
Some terminal devices use their own special procedures for the functions described in the following. Refer to the operating instructions for
the terminal device being used for detailed information.
Only telephone connections, i. e. calls between extensions, are presented as examples in the following procedures. For analog telephones,
these functions are only described for tone dialing terminal devices equipped with a flash key. The tones and signals described below are he-
ard when using analog telephones. These tones may be different for ISDN telephones and analog telephones which generate their own dial
tones. Other information may also be shown in the display of these telephones.
Please note: ISDN terminal devices connected to the ISDN connection may not have the same signals, ringing cycles or operating
procedures as the internal terminal devices for the PABX system.
Making external calls
Making external calls without »direct exchange line access«
b
Lift up handset Dial line access digit (UK 9)
If you hear the busy signal after dialing the first 0 your telephone either does not have authorization for making external calls, or the
external ISDN connection is busy.
Making outside calls with »direct exchange line access«
b
Lift up handset Dial external number
Making internal calls
All phone calls, fax transmissions or data transmissions that take place between internal analog and ISDN terminal devices are internal con-
nections for which no charges are billed.
Making internal calls without »Direct exchange line access«
b
Lift up handset
Making internal calls with »Direct exchange line access«
b
Lift up handset
Speed dialing from the telephone directory
b *#
Lift up handset
Specific trunk bundle selection
b *8
Lift up handset Code number
0
Dial external number
t
t
Dial internal extension number
* t
Dial internal extension number Conversation
t
Select speed dialing index (000 ... 999)
t
Select trunk group (0...8)
t g
Conduct your call
g
Conduct your call
g
Conversation
g
l
extension is called
t
Dial external number Conversation
English
a
Terminate your call
a
Terminate your call
a
Terminate your call
a
Terminate your call
g
Conversation
g a
Teminate Call
9