Funkwerk elmeg ICT8800 Mode D'emploi page 17

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 42
Now, when you lift up your handset the direct call number will be dialed after the specified time (Default setting: 5 seconds).
Activate/deactivate direct dial-in (Hotline)
b
Lift up handset
Deactivating direct dial-in
The numbers stored in the PABX for direct calls are retained even when the direct call function is deactivated.
Deleting a direct dial-in number (phone number) (Hotline)
b
Lift up handset
The stored direct dial-in number is deleted.
Enquiry Call
You can call another party at any time during an ongoing call.
g
You are conducting a call.
You would like to call anot-
her party
To end the enquiry call press the Disconnect key on your ISDN phone.
or With analog telephones:
R0
The connection put on hold is terminated. The active connection remains.
R1
The active connection is terminated and you return to the call that was previously put on hold.
g
Continue with your call.
Initiating a system parked enquiry
g
You are conducting an ex-
Press the R key. You
ternal call. You want to
will hear the internal
make this call available for
a system parked enquiry.
Accepting a system parked enquiry:Lift up the handset and dial one of the 10 internal numbers or enter the code number *596
Call waiting
During an ongoing call you can accept, or refuse, a waiting call at any time.
Enable / Inhibit call waiting for a further call
b
*
Lift up handset
enable / inhibit
Accepting a waiting call (enquiry call with waiting caller)
#65*
#65#
Canceling a direct dial-in
R
Press the R key.
You will hear the internal dial
tone
R
Dial any one of the 10
configured internal
dial tone.
system parked enquiry
numbers or the fixed
code *596.
58
#
 /
*65#
or
Reactivating direct dial-in Ack. signal Replace handset.
q
Ack. signal
=/)
If you wish to speak to an external
party, dial 0
(UK 9) first.
t
q
You will hear the positive ac-
knowledgement signal. If you
hear the busy tone, dial the
next configured internal ex-
tension number.
q
Ack. signal
English
q
a
a
Replace handset.
g
Dial the number of the party you
wish to reach. You hear the rin-
ging tone in the handset.
a
Replace the handset, the
external call is put on hold
in the waiting loop.
a
Replace handset.
13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Elmeg ict8800xt

Table des Matières