Funkwerk elmeg ICT8800 Mode D'emploi page 15

Transmission of the caller's own number is suppressed using the following procedure with analog terminal devices. Please refer to the ope-
rating instructions for ISDN terminal devices on how to initiate this feature.
b
Lift up handset
Switching call authorization for the next call
Switching call authorization (from the operator set only)
b *595
Lift up handset Dial this code
Switching extension's authorization in enquiry call (from the operator set only)
g R
Conversati- Start enquiry call
on
Reserving a trunk group
Activating trunk group reservation
g
You hear the busy signal
Deleting trunk group reservation
b
Lift up handset
Voice announcement (paging port)
A voice announcement extension can be reached by internal extensions only.
b
Lift up handset
Message (system paging)
Refer to the operating instructions for your telephones to ascertain whether the phones support the message feature.
Making an announcement
b *540
Lift up handset
Enabling / inhibiting messages
You can enable or inhibit the sending of messages to your telephone. If you have inhibit your phone from receiving message, the caller that is
attempting to send a message to you will hear the busy signal.
b
Lift up handset Enabling messages
/Inhibiting messages
*594
Dial this code
t
Dial the number of
the extension
*595
Dial this code Dial the number
of the extension
*40 q
Dial this code Ack. sig-
nal
#41
t
Internal number for the voice an-
nouncement extension
Internal number or team number
* / # 591
t
Dial number
#
t #
a l
Replace the The selected ISDN connection
handset becomes available
q
Ack. signal
g
Voice announcement
t
Ack. signal
q
Ack. signal
q a
Ack. signal Replace handset.
q a
Ack. signal Replace handset.
b
Lift up handset
a
Replace handset.
a
Terminate voice announcement
q g
Message
a
Replace the handset
English
11