Telephone Operation - Funkwerk elmeg CS410 Notice D'utilisation

Enquiry Call
g
Call with subscriber
Call transfer (switching)
g
Call with subscriber 1 Party 1 is put on hold
Broker's call
>
g
Call with sub-
scriber
Three-party conference
>
g
Call with subscriber
1

Telephone operation

Telephone directory
You can store up to 250 names and numbers in the telephone directory. To select a name, you can page
through the directory using the arrow buttons, or enter the specific first letter(s) of the name using the
push-button set.
If the name of the caller is to be shown in the display instead of the caller's number, this number
must be entered in the telephone directory with that name (includingprefix and, when used with a
PABX, the line access digit).
Display of the caller name is only made when the transmitted number corresponds to the number
stored in the phone directory.
If the telephone is disconnected from the ISDN network and then reconnected, or if the data for the telepho-
ne directory are transferred to the system telephone via the PC program, the directory must be reorganized
internally. This process takes place automatically and may require a few minutes. During this time, the te-
lephone directory of your telephone is not available for use.
Settings for telephone book entries
• Name and number
• Outgoing number (MSN assignment)
• Special dial (VIP tone) tone
• Info text
R
Party 1 is put on hold
R
Dial number
s
Connection 1
Call with desi-
...
red subscriber
Connection 4
s
Connection 2
t
Dial number
t g
Call with subscriber 2
>
g
Connection 1
Connection 4
g
Conferen-
Call with subscriber
2
English
g
Call with subscriber 2
s
transfer
s
g
Call with desi-
...
red subscriber
s
d
Conference with
ce
subscribers 1 and 2
15