Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Introduction
Advice on the place of installation
Use an anti-slip pad for your charger, especially on new or polish-treated furni-
ture. Varnishes or polishes may contain substances that soften the base of
your charger. The softened base can leave unwanted spots on furniture sur-
faces. Funkwerk Security Communications GmbH will not be liable for such
damage.
Information for operation
Switch the unit off if the use of mobile phones is not allowed at your where-
abouts, e.g. near medical equipment and facilities. Observe corresponding
bans!
Check the battery charge symbol from time to time. Place the handset into
the charger as soon as the empty battery charge indicator starts flashing
and indicates an exhausted battery.
Observe and follow the safety instructions for the normal version and for
the explosion-proof version of the handset provided in this operating ma-
nual.
Emission of radio signals
The unit meets EC requirements on the emission of radio signals.
As any mobile phone, your business handset is a transmitter and receiver of
radio signals.
The transmitter is designed so that the high-frequency (HF, RF) energy thres-
hold values recommended by the Council of the European Union will not be
exceeded.
These threshold values are part of comprehensive guidelines defining allowed
HF energy values for the general public. These guidelines were prepared by
independent scientific organisations, using regular and thorough evaluation of
scientific studies.
These guidelines include a substantial safety margin that is to guarantee the
security of persons of any age and health condition.
102
FC4‚ FC4 L, FC4 Ex (HS), FC4 L Ex (HS)
Publicité
Table des Matières
