Washing And Drying The Filters - Dyson 360 Eye Mode D'emploi

Washing and drying the filters

Pre-motor filter
Wash the pre-motor filter at least every month according
to the instructions below to maintain performance.
1
Press the cyclone release button and
remove the cyclone unit.
Pull out the pre-motor filter.
24
2
Wash the filter with cold water only. No
hot water and no detergents.
Shake the filter to remove debris and
excess water.
Repeat the wash/shake cycle until the
water runs clear.
3
Allow to completely dry naturally (24
hours minimum).
To refit, re-assemble in reverse order.
24
hrs