Dyson 360 Eye Mode D'emploi page 17

4
Connect your mobile
device to your robot's
Wi-Fi network
When prompted, enter the robot's code.
This can be found either on the back of
the user guide or behind your robot's
clear bin.
Can't see your robot?
Check that your robot's Wi-Fi light is illuminated, see
step 2 in this guide.
Check that your mobile device's Wi-Fi is enabled and
that you are only a short distance from your robot.
5
Connecting
(Wi-Fi light
pulses)
Connect your robot
to your home
Wi-Fi network and
to Dyson
The Wi-Fi light on your robot will pulse
while connecting. When connected
the light will turn off; if the robot
fails to connect the light will become
solid again.
Can't connect your app to your robot?
– Make sure that you are only a short distance
from your robot.
– Check that the robot's Wi-Fi light is illuminated.
Can't connect your robot to your Wi-Fi?
– Your Wi-Fi might not be responding.
– If you've hidden your Wi-Fi, unhide it.
– Check that you haven't set your Wi-Fi to 5GHz.
– Your Wi-Fi needs to be set to 2.4GHz.
Can't connect your robot to the Dyson network?
The Dyson cloud might not have been able to
complete your connection, please try again.
6
Name your robot
and get started!
Once you have registered your
ownership and named your robot
you can get started.
*Featured content based on version 1 of the app.
Visit our website for further assistance:
www.dysoncanada.ca/support/robots
17