Quick Start - Dyson 360 Eye Mode D'emploi

Quick start

1
Setting Up
Open the dock fully to 90° and place
it against the wall.
Plug the cable into either side of
the dock.
Ensure the dock is powered, indicated
by a blue light on the dock.
Tidy any surplus cable by wrapping
it around the plug.
Ensure no objects are within
approximately a 50cm radius
of the dock.
Plug
Cable
10
2
Charging
Place the robot on the dock with
the clear bin facing the wall.
The battery light, located on the power
button will pulsate, turning solid when
fully charged.
Dock
'Power on' indicator
3
Preparing the room
Your robot cleans using powerful
suction, please:
– Remove thin rugs or loose
items that may be sucked up,
limiting movement.
– Tidy obstacles such as shoe laces
or thin cables that may become
entangled in the brush bar.
– Clean any liquid spills or sharp items
that may cause damage to the robot.
Your robot uses infrared sensors
to detect drops, please:
– Ensure there is no clutter such as
bags or shoes within 10cm of any
drops in the room.
Your robot uses a camera to navigate,
please:
– Provide adequate illumination for
the robot to navigate throughout
the clean.
Cables
Remotes
Spills
Magazines
Bag
Shoes