Software Upgrades - Dyson 360 Eye Mode D'emploi

Software upgrades

To ensure you get the best out of your
robot, update to the latest software.
Automatic updates via the Dyson Link app
1
By downloading the Dyson Link app
you will be registered for automatic
updates.
Manually update via USB
1
Check for a software update on the
Dyson website.
Download the update file onto a USB
stick without naming it. The USB stick
must have at least 256MB of free space
and must have no other files or folders
on it.
Remove the post-filter from the robot
and insert the stick into the USB port on
the back of the machine.
2
When an update becomes available
for your robot it will automatically
download and install at the next
available opportunity (when the robot
is inactive, on the dock and connected
to Wi-Fi).
2
Press and hold the power button until a
ring of pink lights flash to indicate that the
robot has started the update.
Go to www.dysoncanada.ca/
support/robots
3
Update progress will be indicated by a
sequence of pink lights. Do not attempt
to interrupt the upgrade sequence
until it has completed. Removal of the
battery during an upgrade may cause
irreparable damage.
Once complete the lights will turn off.
The robot is ready to use again.
3
Update progress will be indicated by a
sequence of pink lights. Do not attempt
to interrupt the upgrade sequence
until it has completed. Removal of the
battery during an upgrade may cause
irreparable damage.
Once complete the lights will turn off.
The robot is ready to use again.
27