Emptying The Clear Bin - Dyson 360 Eye Mode D'emploi

Masquer les pouces Voir aussi pour 360 Eye:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Emptying the clear bin

To empty the bin during a clean press the power button to pause
the robot. Once you've finished, return the robot to the same point
on the floor, press the power button again to resume cleaning.
1
When dirt reaches the MAX mark it's
time to empty the clear bin.
Make sure that the clear bin is emptied
before each use.
22
2
Press the cyclone pack release button.
3
Lift the cyclone out of the clear bin.
Empty the contents into a bin.
To minimize dust/allergen contact when
emptying, encase the clear bin tightly in
a plastic bag and empty.
Cyclone
Cyclone
shroud
Clear bin
Cleaning the
clear bin
Clean the clear bin with cold water only.
Clean the cyclone shroud with a cloth or
dry brush to remove lint and dust.
Ensure the clear bin is completely dry
before replacing.
Do not immerse the whole cyclone in
water or pour water into the cyclones.

Publicité

Chapitres

Table des Matières
loading

Table des Matières