Emptying The Clear Bin - Dyson slim Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

18689_CAN_DC18_OP_MAN
19/9/07
09:18
Page 4

Emptying the Clear bin

Empty as soon as the dirt reaches the level of the max mark – do not overfill.
Turn power off and unplug before emptying the Clear bin.
electric shock or personal injury.
Do not use the machine without the Clear bin
Cleaning the Clear bin
Do not use detergents, polishes or air fresheners to clean the Clear bin
Do not immerse the whole cyclone in water.
Do not put bin in a dishwasher.
Ensure bin is completely dry before replacing.
Ensure the bin has been emptied and bin base is open.
Separate Clear bin
TM
and clean shroud as necessary with a cloth or small brush
to remove lint.
Washing your filter
Check your filter regularly and wash at least every 3-6 months according to instructions to
maintain performance.
Turn power off and unplug before washing the filter. Failure to do so could result in electric
shock or personal injury.
The filter may require more frequent washing if vacuuming fine dust.
Do not use detergent to clean filter.
Do not put the filter in the dishwasher, washing machine, clothes dryer, microwave or near
an open flame.
Air dry for at least 12 hours.
Ensure filter and case are completely dry before refitting onto the machine.
Clearing blockages/brushbar
Please note: clearing blockages is not covered by your machine's limited warranty.
Turn power off and unplug before checking for blockages. Failure to do so could result in
electric shock or personal injury.
If any part of your machine becomes blocked, it may overheat and then automatically shut
off. Unplug machine and leave to cool down. Clear blockage before restarting.
If brushbar becomes obstructed, turn power off and unplug before checking for blockages.
Remove the blockage and press the RESET button located on the top of the cleaner head
before restarting vacuum.
Please ensure machine is upright before removing hose or airway inspection ports.
Beware of sharp objects when clearing blockages.
Refit all parts of the machine securely before using it.
TM
TM
Failure to do so could result in
TM
in place.
TM
TM
.

Publicité

Table des Matières
loading

Table des Matières