Ecler DP 300 Manuel Utilisateur page 7

PREVIOUS and NEXT keys
By pressing these keys, individual settings of a certain
menu item chosen by pressing the encoder can be accessed.
Example: If you are in the SETUP screen, PREVIOUS and
NEXT will lead you to the individual adjustable parameters
inside the SETUP menu.
◄ and ► keys
These buttons can be used to perform adjustments on the selected parameter that is shown in
the LCD display. Numeric parameters will increase or decrease their value, while in other cases, an
option list will be offered. Pushing these buttons is equivalent to turning the encoder wheel.
SAVE/ENTER key
This key is used to store new programs to the internal memory of the device. The ENTER key is
also used to confirm certain actions.
RECALL Key
Press this button whenever you wish to recall a previously saved program from the internal
memory of the DP300. If the device is new, no programs are found in memory. To recall a program
stored in memory, first press RECALL, then select the desired program using PREVIOUS and NEXT and
once selected, press RECALL again.
LCD Display
The blue backlit LCD features two rows of 16 characters.
Four different information areas an be found:
1. The upper left part shows the input (IN) or output (OUT)
channel currently being edited.
2. The lower left part shows the currently selected parameter
of the currently selected input or output.
3. The lower right part shows the parameter value.
4. The upper right portion shows information relative to the current status of the DP300. If any
modification to the current program has been done, an asterisk appears.
ON-OFF switch
Simply turns on or off the unit. Please ensure the correct electrical installation before
switching ON the system.
7