Ecler DP 300 Manuel Utilisateur page 45

Here, you can directly access the input/output configuration mode and the standard "New File", "Open
File", "Save File" and "Help" buttons. An additional button
between the dp:lab and the DP300 and automatically download the current program in the DP300 to the
dp:lab software.
If the communication fails (damaged cable, wrong COM port assignment, wrong MIDI channel) an error
message will appear.
The main screen also gives access to the menus File, Config, View, Help and Exit
The File menu includes following commands:
New, creates a new file.
-
Open, opens an existing file.
-
Save, saves the current program.
-
Save As, saves the current program wit a different name.
-
Exit, leaves the dp:lab application.
-
The Config Menu has following items:
Configuration, to selct the desired operation mode (mono, ...).
-
RS232, to assign the serial communication port.
-
Memory, to remotely manage the programs stored in the DP300 and in the PC.
-
From the View menu, you can show or hide the Toolbar and the Status Bar
The Help Menu informs about the dp:lab software version.
This manual concentrates on the options in the Config menu, which allows remote control of all DP300
parameters.
CONFIG MENU
Configuration
This menu item lets you choose the general operating mode of the DP300. Following screen appears
when this item is selected,
Following modes are available:
lets you check the serial communication
45