Ecler DP 300 Manuel Utilisateur page 47

RS232
This options allows you to choose one of the serial communication port (COM1-4) which is used to
establish communication with the DP300. The included serial cable with male/female D-SUB9
connectors should be connected between both devices. This menu item also informs about the required
settings on the DP300 so that a successful communication can be established.
The DP300 should be configured in PCPort MIDI mode and MIDI channel number 1.
Memory
This menu option allows remote management of the programs stored in the DP300 internal memory,
with the ease of the PC interface.
47