Ecler DP 300 Manuel Utilisateur page 14

3. Adjusting the delay measurement units
From this screen, the measurement units for the delay parameter can be chosen to suit the application.
The delay parameter can be adjusted in the range from 0 to 635 ms in steps of 21µs.
SETUP
Delay Units
Following units are available:
Milliseconds (ms)
-
Metres (m)
-
Feet (ft)
-
Frames (24, 25 or 30 frames per second)
-
To chose one or another measurement unit, use the ◄ and ►keys or the encoder wheel.
4. LCD Display contrast adjustment
This screen allows changing the contrast of the LCD display.
SETUP
Contrast
Chose the preferred setting using the encoder wheel or the ◄ and ► keys
5. Safety lock
The DP300 offers 3 levels of safety locking designed to protect the system, the programs and the
parameters stored in the processor from unwanted or accidental manipulation. These levels are called
"Lock Out", "Owner Lock" and "OEM Lock".
- Lock Out
This is the first locking screen that appears, being the most basic locking level of all three.
SETUP
Lock Out
Lock Out can be set to "Off" (deactivated) or "On" (activated). If it's set to "On", following parameters and
functions are affected:
No parameter can be modified, except Lock Out and Display contrast.
-
The "Mute" pushbuttons are disabled.
-
Programs cannot be stored or recalled.
-
In order to unlock the unit again, simply access the Lock Out menu item and set it to "Off".
14
ms
/
Off