Ecler DP 300 Manuel Utilisateur page 48

This window includes following commands:
Refresh
This command refreshes and displays the all the programs currently stored in the DP300 in the
application window. The programs are displayed in the same order, the same position and name as in
the DP300 itself.
Store
With this command, the currently active set-up in the dp:lab software can be uploaded to the selected
memory location (in the "Memory" window) on the DP300.
Before this action is executed, the software will ask for confirmation before overwriting the DP300
memory position.
Once the action has been confirmed, dp:lab will ask for the program name to be stored on the DP300.
The program will be stored to the currently selected memory location of the "Memory" window.
After clicking OK, the current settings in the dp:lab software will be uploaded and stored to the DP300
Recall
This command executes the same command as the previously explained Recall command in the DP300.
When the dp:lab Recall button is clicked, (e.g. to recall the program DIGITAL in memory position 2), the
DP300 display will show following message,
RECALLING 00
2 DIGITAL
and program 2 DIGITAL will be recalled from memory.
Load All
This command is used to download the entire memory contents of the DP300 to the PC hard drive.
These files have a "name.ay" format and contain the whole memory structure and program contents of
the DP300.
48