Ecler DP 300 Manuel Utilisateur page 40

Once all operating parameters have been successfully set up, they should be saved to the DP300
internal memory. Press the SAVE key to enter save mode.
A screen appears asking for the memory location and program name. Use the ◄ and ► keys to move
the cursor to the desired position (including the characters for the program number) and change the
characters one by one using the encoder wheel or by pressing the PREVIOUS and NEXT keys.
SAVE
1 ECLER
A name with up to 8 characters can be introduced. Press the SAVE key again and a screen appears
asking whether the program should be saved locked or unlocked.
Store Locked?
Locked
Using the encoder wheel or the ◄ and ► keys, select either "Locked" or "Unlocked"
Store Locked?
Unlocked
Press the SAVE key again to finalize the saving process.
40