Legend (Fig. 1); General Safety Information - Proxxon DS 460 Mode D'emploi

Translation of the Original Operating
GB
Instructions
Contents:
1 Scroll Saw DS 460: ...................................................12
2 Legend (Fig. 1) .........................................................12
3 General Safety Information ..........................................12
4 Description of the Machine (see also fig. 1a and 1b) .........13
5 Technical Data: .........................................................13
6 Installation and Commissioning of the Saw .....................14
6.1 Unpacking (Fig. 2a and 2b): .......................................14
6.2 Installing the Saw ......................................................14
6.3 Adjusting the Angle Display (Fig. 3): ..............................14
6.4 Assembling the Air Nozzle (Fig. 4): ..............................14
6.5 Connecting the Vacuum Cleaner (Fig. 5): ........................14
6.6 Saw Blades ............................................................14
6.6.1 Clamping and Changing the Saw Blade ........................14
6.6.1.1 Pushing the Saw Table Back or into the
Working Position (Fig. 6) .............................................14
6.6.1.2 Saw Blades with Flat Ends
(Hand and Fret Saw Blades) (Fig. 7a and 7b): ...............15
6.6.2 Swa Blades with Pin Ends (Fig. 8): ..............................15
6.6.3 Fine Setting of the Correct Saw Tension (Fig. 9): ............15
7 Working with the Saw: ................................................15
7.1 General Information for Working with the Scroll Saw .........15
7.1.1 Choice of Saw Blade ................................................15
7.1.2 Selecting the Speed: ................................................16
7.1.3 Possible Causes of Broken Saw Blades: ........................16
7.2 Sawing (Fig. 10) ......................................................16
7.2.1 Inside Cuts (Fig. 11) ...................................................16
7.2.2 Mitre Cuts (Fig. 2b) ...................................................16
7.2.2.1 Setting the Mitre Angle ................................................16
7.2.2.2 Fine Setting (Fig. 2b) ................................................16
7.2.2.3 Setting the saw blade stroke (fig. 12 a and 12 b) ............16
8 Maintenance and Repairs ..........................................17
9 Cleaning and Care: ...................................................17
10 Disposal ..................................................................17
11 CE Declaration: .........................................................17
12 Spare Parts List.........................................................78
13 Exploded Drawing......................................................79
1 Scroll Saw DS 460:
Dear customer!
The use of these instructions
• makes it easier to become acquainted with the device,
• prevents malfunctions due to improper handling, and
• increases the service life of your device.
Always keep these instructions close to hand.
Only operate this device with exact knowledge of it and comply with the
instructions.
PROXXON will not be liable for the safe function of the device for:
• handling that does not comply with the usual intended use,
• other application uses that are not stated in the instructions,
• disregard of the safety regulations,
You will not have any warranty claims for:
• operating errors,
• lack of maintenance.
For your safety, please comply with the safety regulations without fail.
Only use original PROXXON spare parts.
All rights reserved for further developments in the course of technical
progress. We wish you much success with the device.
12

2 Legend (Fig. 1)

1. Adjusting knob for saw blade tension
2. Saw blade holder, top
3. Saw blade
4. ON - OFF switch
5. Adjusting knob for number of strokes
6. Screw for fine setting of the work table's angle of rotation
7. Die-cast steel pedestal
8. Air nozzle
9. Die-cast steel machine body
10. Rotatable saw table
11. Saw blade holder, bottom
12. Holes for fastening screws
13. Slide blocks for clamping the saw blade
14. Rubber connecting piece for vacuum cleaner connection
15. Mains cable
16. Induction motor
17. Saw arm (top)
18. Saw arm (bottom)
19. Recesses for the slide blocks
20. Lock lever
21. Clamping screw for lock lever
22. T-handle key
23. Hose
24. Clamping screw for air nozzle alignment
25. Dust suction connection
26. Arm for saw blade guard
27. Clamping screw for saw blade guard
28. Saw blade guard

3 General Safety Information

CAUTION! When using electric power tools, the following safety
measures must be observed for protection from electric shock,
risk of injury, and fire hazards.
Read and take note of all these instructions before you start up
the product. Keep these safety instructions in a safe place.
Safe working
Always keep your working area tidy.
1. Disorder in the working area can lead to accidents.
Take account of surrounding influences.
1. Do not expose tools to the rain.
2. Do not use tools in damp or wet surroundings.
3. Ensure that the lighting is good.
4. Do not use tools in the vicinity of combustible liquids or gases.
Protect yourself from electric shocks.
1. Avoid body parts from coming into contact with earthed parts.
Keep other people away.
1. Do not let other people, especially children, touch the tool or the
cable. Keep them well away from the working area.
Keep unused tools in a safe place.
1. Unused equipment should be kept in a dry, closed location out of
the reach of children.
Do not overload your tool.
1. You will be able to work better and safer within the given power
range.
Always use the correct tool.
1. Do not use low power machines for heavy work.
2. Do not use tools for purposes for which they were not designed. For
example do not use manually-operated circular saws for cutting
branches or firewood.