Télécharger Imprimer la page

Specifications; Spare Parts And Accessories - Stihl MH 710 Notice D'emploi

Masquer les pouces Voir aussi pour MH 710:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26

19 Specifications

Fault
Excessive vibration
during operation.
Tilling performance
reduced.
Loud gearbox noise.
Drive shaft does not
rotate when clutch
lever actuated.
Oil leaking from gear‐
box or engine.
19 Specifications
19.1
STIHL MH 710 Tiller
– Displacement: 252 cc
– Power: 5.2 kW (7.1 HP) at 3,600 rpm
– Drive shaft speed in first gear: 65 rpm
– Drive shaft speed in second gear: 128 rpm
– Drive shaft speed in reverse gear: 49 rpm
– Weight: 102 kg
– Maximum fuel tank capacity: 4.0 l
– Hoe diameter: 36 cm
– Maximum working width: 98 cm
19.2
Sound Values and Vibration
Values
The K value for the sound pressure levels is
2 dB(A). The K value for the sound power levels
0478-404-9905-C
Cause
Angle of machine
inclination over 15°.
Engine mounting
loose.
Hoes incorrectly
installed.
Hoes worn.
Blade spur incorrectly
set.
Blade spur incorrectly
set.
Drive belt worn.
Incorrect oil level in
gearbox.
Components in gear‐
box worn.
Cable defective.
Drive belt worn.
Components in gear‐
box or engine worn.
Remedy
► Place machine in horizontal working position.
► Tighten engine mounting bolts.
► Install hoes correctly.
► Replace hoes.
► Adjust blade spur.
► Adjust blade spur.
► Consult a STIHL specialist dealer.
► Check oil level in gearbox.
► Consult a STIHL specialist dealer.
► Check or replace cable.
► Consult a STIHL specialist dealer.
► Consult a STIHL specialist dealer.
is 2 dB(A). The K value for the vibration values is
3.20 m/s².
– Sound pressure level L
ance with 2006/42/EC: 86 dB(A)
– Sound power level L
ance with 2000/14/EC: 100 dB(A)
– Vibration value a
with EN 12096, handlebar: 8 m/s²
For information on compliance with Employers'
Vibration Directive 2002/44/EC, see
www.stihl.com/vib.
19.3
REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
20 Spare Parts and Accesso‐
ries
20.1

Spare parts and accessories

These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
measured in accord‐
pA
measured in accord‐
wA
, measured in accordance
hv
English
23

Publicité

Dépannage

loading