Stihl MH 710 Notice D'emploi page 12

English
► Insert screw clamp (10) through lower handle‐
bar (1).
► Fit washers (11) and screw on nuts (12).
► Tighten nuts (12) so upper handlebar (8) can
be adjusted when opening lever (7).
► Insert cables and wiring harness (13) in
clip (14).
► Fasten the cables to the handlebar at regular
intervals using cable ties (15).
6.6 Attaching the Cables
Attaching the self-propulsion cable
► Insert self-propulsion cable (1) through
lever (2).
► Fit washer (3).
► Screw on nut (4).
► Attach spring (5) to holder (6).
12
Attaching the reverse gear cable
► Attach reverse gear cable (7) to holder (8) and
holder (9).
Securing the throttle cable
► Secure throttle cable (10) using cable clip (11).
Securing the cable
► Secure cable (12) using cable clip (13).
► Secure cable conduit (14) with cable clip (15).
6.7 Attaching the Transport Handle
► Unscrew nuts (1) and remove washers (2) and
bolts (3).
► Discard nuts (1) and bolts (3).
6 Assembling the Cultivator
0478-404-9905-C