Problems And Solutions - AERMEC VED 030 I Manuel D'utilisation Et D'entretien, Instructions D'installation

9.1.

PROBLEMS AND SOLUTIONS

PROBLEM
Feeble air discharge.
It does not heat.
It does not cool.
The fan does not turn.
Condensation on the unit cabinet.
For anomalies don't hesitate, contact the aftersales service immediately.
PROBABLE CAUSE
Wrong speed setting on the control panel.
Blocked filter.
Obstruction of the air flow (inlet and/or outlet).
Poor hot water supply.
Wrong setting on control panel.
Poor chilled water supply.
Wrong setting on control panel.
No current.
The water has not reached operating temperature.
The limit conditions of temperature and humidity indicated in
"MINIMUM AVERAGE WATER TEMPERATURE" have been
reached.
REMEDY
Select the speed on the control panel.
Clean the filter.
Remove the obstruction.
Control the boiler.
See control panel settings.
Control the chiller.
See control panel settings.
Control the power supply.
Please check up the boiler or the chiller.
Check up the thermostat settings.
Increase the water temperature beyond the minimum limits indi-
cated in "MINIMUM AVERAGE WATER TEMPERATURE".
35
4880950_03 - 1811