FujiFilm SonoSite X-Porte Instructions D'installation page 6

b Remove the PowerPark box, and carry it to the PowerPark installation location.
Notes
Set up the ramp
The crate lid can be used as a ramp that helps you remove the system from the crate.
1 With a box cutter, cut all four corners of the lid so that it lays flat.
2 With the corrugated ramp supports on the bottom, place the highest end of the ramp next to the base of
the crate.
4
See the PowerPark Assembly Instructions, inside the PowerPark box, for
instructions on assembling the PowerPark docking station.
Unpacking the system