FujiFilm SonoSite X-Porte Instructions D'installation page 8

2 Roll the system down the ramp.
3 Remove the plastic bag and packaging materials from the system, and inspect the system for damage.
4 Wheel the system to its intended destination. Push the bar on the front of the system to move it.
Caution To avoid tipping, when transporting the system, always push the system using the
bar on the front. Do not move the system by pushing or pulling on any other
components, such as the clinical monitor.
5 When the system is at its desired location, lock the wheels by pressing down on the lever.
6 Unpacking the system